China solar mounting manufacturer
A roof-hook-based PV solution for pitched clay, concrete, and porcelain tile roofs. This China anti-sliding pitched tile roof solar mounting system is configured around verified rafter fixing, tile-profile fit, rail alignment, and project-specific wind and snow requirements.
China anti sliding pitched tile roof solar mounting is a project-configured PV racking solution for EPC contractors, installers, and distributors sourcing roof-mounting hardware from China. It combines roof-specific stainless steel hooks, aluminum rails, module clamps, grounding accessories, and documented installation requirements for pitched tile roofs.
Ziyuan Solar supplies anti-sliding pitched tile roof solar mounting systems for residential, commercial, and distributed-generation projects. The system combines SUS304 stainless steel tile roof hooks with AL6005-T5 aluminum rails, module clamps, grounding parts, and approved fasteners.
For overseas buyers sourcing from China, the key question is not whether a hook is described as universal. It is whether the supplier can match the hook, rail layout, fasteners, and roof interface to the actual tile profile and supporting structure. Ziyuan Solar supports sample checking, component selection, technical drawings, and export procurement for EPCs, installers, and distributors.
The anti-sliding performance comes from a coordinated installation: the hook is fixed to a verified rafter or purlin, the hook geometry is selected for the actual tile profile, and the rail-and-clamp assembly transfers module loads into the roof structure. It is not a claim that one hook fits every tile.
For an accurate quotation, please share roof photos or drawings, tile type and profile, tile dimensions or model number, roof pitch, rafter or purlin spacing, module datasheet, module quantity, project location, local wind or snow design basis, delivery destination, and required delivery date. Final hook spacing, fasteners, flashing details, and structural verification must follow the approved project design.
Why Use an Anti-Sliding Tile Roof Mounting System?
Secure load path
Hooks are designed to transfer rail and module loads to verified structural members below the tile.
Profile-aware fit
Fixed or adjustable hooks can be selected after checking tile height, overlap, and roof pitch.
Roof-conscious installation
Correct hook position and tile clearance help reduce point loading and avoid unnecessary tile stress.
Export-ready sourcing
Receive component lists, packing information, drawings, and project communication for B2B procurement.
Technical Parameters
| Parameter | Value |
|---|---|
| Product name | Anti-Sliding Pitched Tile Roof Solar Mounting System |
| Roof applications | Pitched clay tile, concrete tile, porcelain tile, and approved curved tile profiles |
| Roof attachment | Fixed or adjustable stainless steel tile roof hooks, fastened to verified rafters or purlins as required by the project design |
| Main materials | SUS304 stainless steel and AL6005-T5 anodized aluminum |
| Module orientation | Portrait or landscape, subject to rail layout and module clamp zones |
| Indicative wind capacity | Up to 60 m/s, subject to roof condition, spacing, fastening design, and local engineering |
| Indicative snow load | Up to 1.4 kN/m², subject to project verification |
| Design reference | AS/NZS 1170 reference, with applicable local code confirmation |
| Customization | Hook dimensions, rail length, clamp type, packaging, and documentation subject to confirmation |
Product Specifications
Standard capability ranges are shown below. Final component selection, attachment spacing, and structural verification must be confirmed for each project.
| Installation site | Pitched tile roofs |
| Roof pitch | 10°–60° |
| Building height | Up to 20 m* |
| Maximum wind speed | Up to 60 m/s* |
| Maximum snow load | Up to 1.4 kN/m²* |
| Design references | AS/NZS 1170, DIN 1055, and applicable project-specific local codes* |
| Main materials | Aluminum alloy and corrosion-resistant stainless steel |
| Surface protection | Anodized aluminum and corrosion-resistant stainless steel |
| Standard finish | Natural silver; custom finishes subject to confirmation |
| Warranty | 12 years* |
| Design service life | More than 25 years* |
*Values depend on the selected configuration, fastening method, roof structure, environmental conditions, and project engineering review. Contact Ziyuan Solar for final confirmation before installation.
Explore more hook and rail options in our tile roof solar mounting systems.
System Components
1. Tile Roof Hook
2. Rail Fixing Assembly
3. Aluminum Rail
4. Rail Connector
5. End Clamp
6. Mid Clamp
7. Earthing Plate
8. Grounding LugHow the Anti-Sliding Installation Works
- Check the roof: Confirm tile type, roof pitch, tile overlap, rafter or purlin position, and roof condition.
- Position the hook: Place each hook over a verified structural member and maintain the required tile clearance.
- Fix to structure: Use the approved fastener size, embedment, spacing, and sealing method for the roof construction.
- Install rails and clamps: Level the aluminum rails, connect rail sections, and clamp modules within the manufacturer-approved zones.
- Inspect: Check torque, rail alignment, tile condition, grounding continuity, and waterproofing details before handover.
A roof hook should not be fixed only to the tile. Where a roof is deteriorated, structurally uncertain, or outside the approved tile profile, stop and obtain a qualified roof and structural assessment before proceeding.
For a fuller installation workflow, including roof access, tile lifting, hook fixing, rail alignment, grounding, cable management, and module clamping, read our guide to installing solar panels on a tile roof.
Pitched Tile Roof Solar Project Examples
The examples below show completed arrays and installation-stage rail layouts on different pitched tile roofs. The final hook type, attachment spacing, and rail layout remain project-specific.
For EPCs, Installers, and Distributors
China sourcing is most effective when the mounting supplier can support the complete project brief. Ziyuan Solar can review the roof interface, prepare a component list, confirm packaging, and coordinate technical questions for export projects.
- Roof-specific hook and rail configuration
- Samples for tile-profile checking
- Product drawings and installation information
- Private-label or project packaging discussion
- Quotation support for repeat distribution orders
- Communication with the buyer’s qualified design and installation team
Request a project quotation
Send roof photos or drawings, tile profile, roof pitch, rafter spacing, module datasheet, project location, quantity, wind or snow basis, and delivery destination. Our team can review the roof interface and support component selection, technical drawing review, and packing-list preparation for the project.
Frequently Asked Questions
What does anti-sliding mean in a pitched tile roof solar mounting system?
It describes a coordinated hook, fastener, rail, and module layout that resists movement under design loads when fixed to verified roof structure. It does not mean that one hook is universal for every tile.
Can the system be used on clay and concrete tiles?
Yes, subject to confirmation of the tile profile, dimensions, roof pitch, supporting structure, and hook clearance. Samples or drawings can be reviewed before production.
Will the roof hooks damage or leak the tile roof?
Installation should preserve tile clearance and follow the approved flashing or sealing details. Roof penetrations and fastening locations must be designed for the specific roof by qualified personnel.
What information is needed for a China supplier quotation?
Provide roof photos or drawings, tile type and profile, tile dimensions or model number, roof pitch, rafter or purlin spacing, module datasheet, module quantity, project location, local wind or snow design basis, delivery destination, and required delivery date.
Are the wind and snow figures guaranteed for every roof?
No. The indicative figures are reference values only. Final capacity depends on roof structure, edge zones, attachment spacing, fasteners, module layout, local code, and project-specific engineering.
Can EPCs source this anti-sliding tile roof mounting system from China?
Yes. Ziyuan Solar supports export procurement for EPCs, installers, and distributors. Buyers can submit roof information, module details, quantities, delivery requirements, and applicable wind or snow criteria for component selection, quotation, technical communication, and packing-list preparation.
Build a Roof-Specific Mounting Configuration
For anti-sliding pitched tile roof solar mounting, the best result comes from matching the hook to the actual roof before ordering. Ziyuan Solar supports project review for installers, EPC contractors, and distributors sourcing from China, including component selection and documentation coordination before production.
General product information only. Final mounting configuration, structural verification, roof interface, electrical bonding, installation method, and compliance responsibilities must be confirmed by appropriately qualified professionals for the specific project.
